GUIDE

Exposure metering

How the camera decides the exposure, when it gets it wrong – and how the metering mode, exposure lock and compensation help you get the exposure right.

The basic idea

The camera sees the world as middle grey

The light meter doesn't know what you are photographing. It assumes that the scene is on average middle grey and exposes accordingly. Most of the time the assumption works, but in special situations the meter always gets it wrong in the same direction:

+ Lots of white (snow, beach sand, a white wedding dress): The camera darkens the photo to grey. Use positive exposure compensation.
− Lots of black (night, a dark background, a black dog): The camera lightens the photo until it looks washed out. Use negative exposure compensation.
● A bright background behind a small subject (a bird against the sky, backlight): The background drives the metering and the subject stays dark. Change the metering mode or compensate upwards.
Metering modes

Four metering modes and when to use them

You choose the metering mode from the camera's quick menu or with its own button. The names vary between brands:

● Evaluative / Matrix / Multi (Canon Evaluative, Nikon Matrix, Sony Multi): Meters the whole frame and gives weight to the focus point. The best all-round setting – keep it as your default.
● Centre-weighted: Meters the whole frame but emphasises the centre. Predictable and consistent, which is why many people use it in manual mode.
● Spot / Partial (Spot, Canon Partial): Meters only a small area, often at the focus point. Use it when the subject is much brighter or darker than the background – a performer in a spotlight, the moon in the night sky, a bird against a bright sky.
● Highlight-weighted (Nikon Highlight-weighted, Sony Highlight): Exposes so that the brightest areas don't blow out. Excellent for concerts, stage lights and sunsets.
Lock and compensation

Exposure lock (AE-L) and exposure compensation

1 Exposure lock: Point the camera at the area you want to expose for (e.g. a face) and press the exposure lock button (Canon *, Nikon and Sony AE-L). Then recompose – the exposure stays locked.
2 Exposure compensation (+/− EV): In Av, Tv and P modes compensation tells the camera how much to change the meter's result. +1 EV doubles the light, −1 EV halves it. Remember to set it back to zero after shooting.
3 Manual mode + Auto ISO: With the aperture and shutter speed fixed and ISO on auto, exposure compensation adjusts the ISO. A handy combination for example for bird photography.
A mirrorless camera shows the exposure in advance: In the viewfinder you see how bright the finished photo will be before you press the shutter. Also turn on the histogram and the highlight warning ("zebras" or blinking areas), so you see blown-out areas straight away.
Check the result

The histogram and colours

You can't trust the brightness of the rear screen in sunshine or in the dark. Check the exposure from the histogram: if the graph is pressed against the right edge, the bright areas are blown out. The colours are taken care of by the white balance, which you can correct afterwards in a RAW file without any loss of quality.

Read more: These topics have their own in-depth guides: Histogram & exposure compensation and White balance & colour temperature.

All guides · Ask about this guide