GUIDE

MANUAL SETTINGS (M MODE)

Master the three key parts of the exposure triangle. Don’t guess your settings – choose them deliberately for each situation.

THE BASICS

WHAT IS M MODE?

M mode, or manual exposure, gives you full control over the camera’s exposure. You decide the shutter speed, the aperture and the ISO instead of the camera making those decisions automatically.

Once you learn to handle these three settings together, you can set up the camera exactly for the situation in front of you.

EXPOSURE TRIANGLE

THE THREE PARTS OF THE EXPOSURE TRIANGLE

  • 1. Shutter speed: Sets how long light reaches the camera’s sensor. A fast shutter speed freezes motion, while a slow one makes movement soft.

    Example: For sports or a bird in flight you can use 1/1000 s or an even faster shutter speed.

  • 2. Aperture (f-number): Controls how much light comes through the lens and at the same time affects the depth of field:

    • f/1.8 – f/2.8: A wide aperture – the background softens and the subject stands out well.
    • f/5.6 – f/8: A good all-round setting, for example for landscapes and whenever you want more sharpness.
    • f/11: A small aperture – more of the landscape is sharp.
  • 3. ISO (sensor sensitivity): Affects how sensitively the camera responds to light. A lower ISO gives a cleaner image, a high ISO helps in low light:

    • ISO 100: A clean image – a bright day (low noise).
    • ISO 800: A good all-round setting as the evening gets darker (medium).
    • ISO 6400: Dusk and night photography (more noise).
METERING

CHECK THE LIGHT METER

In M mode the camera doesn’t make exposure decisions for you. Adjust the shutter speed, aperture and ISO and watch the camera’s light meter. The middle of the scale, 0, means a balanced exposure according to the camera’s metering.

Underexposure (-1 ... -2) The photo is too dark. Use a slower shutter speed, open the aperture or raise the ISO.
Overexposure (+1 ... +2) The photo is too bright. Use a faster shutter speed, close the aperture or lower the ISO.
BALANCE

BALANCING THE EXPOSURE TRIANGLE

Shutter speed, aperture and ISO all affect the brightness of the photo together. When you change one setting, you often have to change another too, to keep the exposure right:

Shutter speed Affects freezing motion and the length of the exposure.
Aperture Affects the amount of light and the depth of field.
ISO Affects sensitivity to light and digital noise.
TROUBLESHOOTING

COMMON PROBLEMS IN M MODE

A blurry or smeared photo? The shutter speed may be too slow for handheld shooting or for a moving subject. Use a faster shutter speed and, if needed, open the aperture or raise the ISO.
The photo is too bright? Use a faster shutter speed, close the aperture or lower the ISO. In bright sunshine a very wide aperture may also need an ND filter.
The photo is too dark? Use a slower shutter speed, open the aperture or raise the ISO. But watch out for too slow a shutter speed when shooting handheld.
A dark band at the edge of the photo with flash? The shutter speed is faster than the camera’s flash sync speed (usually 1/200–1/250 s), so the shutter curtain covers part of the frame. Slow the shutter down to the sync speed or use the flash’s HSS mode.
QUICK GUIDE

QUICK CHECKLIST

  • Moving subject: → fast shutter speed
  • Blurring the background: → small f-number
  • Landscapes: → larger f-number
  • Dim location: → raise the ISO if needed
  • Photo too dark: → let in more light with your settings
  • Photo too bright: → let in less light with your settings

Go deeper: Each part of the exposure triangle has its own guide – aperture (FI), shutter speed (FI) and ISO. How the light meter works is explained in the guide Metering (FI).

Next guideFocus modes

All guides · Ask about this guide