PRO GUIDE

RAW development & processing

Get everything out of your camera's sensor: learn to develop RAW photos systematically so that the dynamic range, colours and detail come into their own.

THE BASICS

1. Why shoot RAW?

A RAW file is not a finished photo but raw data recorded by the camera's sensor – a kind of digital negative. The camera hasn't made any final choices yet, so the decisions about light and colour are left to you:

  • More room to adjust: You can recover detail from almost blown-out areas (Highlights) and open up dark shadows (Shadows) much further than in a JPEG before the quality suffers.
  • Lossless white balance: In a RAW file the colour temperature (Kelvin) is just a setting, not part of the image. You can change it freely afterwards without any loss of quality.
  • Greater colour depth: RAW records 12–14 bits of tonal data per colour channel, in other words thousands of tonal steps for each colour. A JPEG has only 256 (8 bits), which is why heavy adjustments easily cause banding and colour steps in a JPEG.
  • The original is kept: The development program doesn't change the RAW file but saves the adjustments separately. You can always go back to the start or make several versions of the same photo.
SOFTWARE

2. What do you develop RAW photos with?

A RAW file (e.g. Canon .CR2/.CR3, Nikon .NEF or Sony .ARW) always needs a development program. The slider names in this guide are from Lightroom, but the same principles work in all programs:

Program Price Especially good for
Lightroom Classic / Camera Raw Monthly subscription Managing and developing large numbers of photos in one program
Capture One Subscription or one-off purchase Precise colour management and studio photography
Darktable Free Versatile development without a monthly fee
RawTherapee Free Detailed adjustments and sharpening
The camera maker's software Free Reproducing the camera's own colours (e.g. Canon DPP)
WORKFLOW

3. Developing in the right order

Work from top to bottom. When the basics are right before fine-tuning, you don't have to fix the same things over and over:

1Profile & lens corrections Choose a camera profile (e.g. Adobe Color or Camera Standard) and turn on Enable Profile Corrections and Remove Chromatic Aberration.
2Crop & straighten Straighten the horizon and crop the photo now, so that bright or dark areas at the edges don't affect the next adjustments.
3White balance Set the basic tone of the photo with the Temp and Tint sliders, or click a neutral grey spot with the eyedropper.
4Exposure & tones Adjust the Exposure, lower the bright areas (Highlights) and open up the shadows (Shadows). Set the white and black points by dragging the Whites and Blacks sliders with Alt held down.
5Colours Boost colours first with the Vibrance slider. Fine-tune individual tones in the HSL / Color Mixer panel.
6Local adjustments Use masks (e.g. Select Sky or Select Subject) only on the areas that need their own treatment.
7Sharpening & noise Remove the noise first (e.g. Denoise) and then sharpen moderately. Limit the sharpening to edges with the Masking slider.
8Export For the web, export as JPEG in the sRGB colour space. For prints use full resolution and TIFF if needed.
QUICK GUIDE

4. Typical adjustment ranges

Every photo is different, but these values are a good starting point for an ordinary landscape or general photo:

Slider Typical range What it does
Highlights -30 … -80 Recovers the detail in clouds and sky
Shadows +20 … +50 Opens up dark areas without flattening the photo
Whites / Blacks Using the Alt key Sets the brightest and darkest points of the photo
Texture / Clarity +5 … +20 Enhances surfaces and midtone contrast
Vibrance +10 … +25 Adds colour without oversaturating skin tones
Sharpening (Amount) 40 … 70 Sharpens, with Masking limiting the effect to edges
GALLERY

5. A RAW photo before and after

An unprocessed RAW photo often looks dull and flat, because the camera hasn't added any contrast, colour or sharpness to it yet. With the right development the hidden dynamic range comes out:

A RAW photo before editing

Before: dull and low contrast, but all the tonal information is there.

A RAW photo after development

After: dynamic range balanced, colours deepened and detail sharpened.

A pro trick: When one photo is finished, copy its settings to the other photos taken in the same light (in Lightroom Ctrl + Shift + C and Ctrl + Shift + V). Save the settings you use often as your own preset, and a whole series gets a consistent look in minutes.

TROUBLESHOOTING

6. The most common pitfalls

Shadows pushed too far? When the shadows are pushed to the extreme (+100), noise and colour shifts appear and the photo looks grey. Open the shadows moderately and restore depth with the Blacks slider.
Plastic-looking skin? Too much noise reduction removes all texture from skin and surfaces. Keep Noise Reduction moderate and accept a little natural grain.
Halos along edges? Too much sharpening or Clarity creates light edges around dark subjects. Lower the values and limit the sharpening with the Masking slider (hold Alt to see where it applies).
Oversaturated colours? Saturation boosts all colours equally, and skin easily turns orange. Use Vibrance first and correct individual colours in the HSL panel.
Photo looks different from the camera screen? The camera screen shows a processed JPEG preview. Choose the Camera Standard profile in the program if you want to start from the camera's own colours.
Colours change online? The photo was probably exported in the AdobeRGB or ProPhoto colour space. Always export photos for the web in sRGB.

All guides · Ask about this guide